Effects of SO2 and H2O on low-temperature NO conversion over F-V2O5-WO3/TiO2 catalysts

F-V_2 O_5-WO3/Ti02 catalysts were prepared by the impregnation method.As the content of F ions increased from 0.00 to 0.35 wt.%,the NO conversion of F-V_2 O_5-WO_3/TiO_2 catalysts initially increased and then decreased.The 0.2 F-V_2 O_5-WO_3/TiO_2 catalyst(0.2 wt.% F ion)exhibited the best denitration(De-NOx) performance,with more than 95% NO conversion in the temperature range 160-360℃,and 99.0% N2 selectivity between 110 and 280℃.The addition of an appropriate amount of F ions eroded the surface morphology of the catalyst and reduced its grain size,thus enhancing the NO conversion at low temperature as well as the sulfur and water resistance of the V_2 O_5-WO3/Ti02 catalyst.After selective catalytic reduction(SCR) reaction in a gas flow containing SO_2 and H_2 O,the number of NH3 adsorption sites,active component content,specific surface area and pore volume decreased to different degrees.Ammonium sulfate species deposited on the catalyst surface,which blocked part of the active sites and reduced the NO conversion performance of the catalyst.On-line thermal regeneration could not completely recover the catalyst activity,although it prolonged the cumulative life of the catalyst.In addition,a mechanism for the effects of S02 and H_2 O on catalyst NO conversion was proposed.     

Development of a static test apparatus for evaluating the performance of three PM2.5 separators commonly used in China

PM_(2.5) separator directly affects the accuracy of PM_(2.5) sampling.The specification testing and evaluation for PM_(2.5) separator is particularly important,especially under China's wide variation of terrain and climate.In this study,first a static test apparatus based on polydisperse aerosol was established and calibrated to evaluate the performance of the PM_(2.5) separators.A uniform mixing chamber was developed to make particles mix completely.The aerosol concentration relative standard deviations of three test points at the same horizontal chamber position were less than 0.57%,and the particle size distribution obeyed logarithmic normal distribution with an R~2 of 0.996.The flow rate deviation between the measurement and the set point flow rate agreed to within ± 1.0% in the range of -40 to 50℃.Secondly,the separation,flow and loading characteristics of three cyclone separators(VSCC-A,SCC-A and SCC112) were evaluated using this system.The results showed that the 50% cutoff sizes(D_(50)) of the three cyclones were 2.48,2.47 and 2.44 μm when worked at the manufacturer's recommended flow rates,respectively.The geometric standard deviation(GSD) of the capture efficiency of VSCCA was 1.23,showed a slightly sharper than SCC-A(GSD = 1.27),while the SCC112 did not meet the relevant indicator(GSD = 1.2 ± 0.1) with a GSD = 1.44.The flow rate and loading test had a great effect on D_(50),while the GSD remained almost the same as before.In addition,the maintenance frequency under different air pollution conditions of the cyclones was summarized according to the loading test.     

Synergistic effects of Cu species and acidity of Cu-ZSM-5 on catalytic performance for selective catalytic oxidation of n-butylamine

In this work, a series of Cu-ZSM-5 catalysts with different SiO₂/Al₂O₃ ratios (25, 50, 100 and 200) were synthesized and investigated in n-butylamine catalytic degradation. The n-butylamine can be completely catalytic degradation at 350°C over all Cu-ZSM-5 catalysts. Moreover, Cu-ZSM-5 (25) exhibited the highest selectivity to N₂, exceeding 90% at 350°C. These samples were investigated in detail by several characterizations to illuminate the dependence of the catalytic performance on redox properties, Cu species, and acidity. The characterization results proved that the redox properties and chemisorption oxygen primarily affect n-butylamine conversion. N₂ selectivity was impacted by the Brønsted acidity and the isolated Cu²⁺ species. Meanwhile, the surface acid sites over Cu-ZSM-5 catalysts could influence the formation of Cu species. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra was adopted to explore the reaction mechanism. The Cu-ZSM-5 catalysts are the most prospective catalysts for nitrogen-containing volatile organic compounds removal, and the results in this study could provide new insights into catalysts design for VOC catalytic oxidation.     

UV/H2O2 oxidation of tri(2-chloroethyl) phosphate: Intermediate products, degradation pathway and toxicity evaluation

Tri(2-chloroethyl) phosphate (TCEP) with the initial concentration of 5 mg/L was degraded by UV/H₂O₂ oxidation process. The removal rate of TCEP in the UV/H₂O₂ system was 89.1% with the production of Cl^? and PO₄^3? of 0.23 and 0.64 mg/L. The removal rate of total organic carbon of the reaction was 48.8% and the pH reached 3.3 after the reaction. The oxidative degradation process of TCEP in the UV/H₂O₂ system obeyed the first order kinetic reaction with the apparent rate constant of 0.0025 min^?1 (R²=0.9788). The intermediate products were isolated and identified by gas chromatography-mass spectrometer. The addition reaction of HO? and H₂O and the oxidation reaction with H₂O₂ were found during the degradation pathway of 5 mg/L TCEP in the UV/H₂O₂ system. For the first time, environment risk was estimated via the “ecological structure activity relationships” program and acute and chronic toxicity changes of intermediate products were pointed out. The luminescence inhibition rate of photobacterium was used to evaluate the acute toxicity of intermediate products. The results showed that the toxicity of the intermediate products increased with the increase of reaction time, which may be due to the production of chlorine compounds. Some measures should be introduced to the UV/H₂O₂ system to remove the highly toxic Cl-containing compounds, such as a nanofiltration or reverse osmosis unit.     

Photodegradation of Hexafluoropropylene Oxide Trimer Acid under UV Irradiation

As a novel alternative to traditional perfluoroalkyl substances (PFASs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), hexafluoroproplyene oxide trimer acid (HFPO-TA) has been detected worldwide in surface water. Moreover, recent researches have demonstrated that HFPO-TA has stronger bioaccumulation potential and higher hepatotoxicity than PFOA. To treat these contaminants e.g. PFOA and PFOS, some photochemical techniques by adding exogenous substances had been reported. However, there is still no report for the behavior of HFPO-TA itself under direct UV irradiation. The current study investigated the photo-transformation of HFPO-TA under UV irradiation in aqueous solution. After 72 hr photoreaction, 75% degradation ratio and 25% defluorination ratio were achieved under ambient condition. Reducing active species, i.e., hydrated electrons and active hydrogen atoms, generated from water splitting played dominant roles in degradation of HFPO-TA, which was confirmed by different effects of reaction atmospheres and quenching experiments. A possible degradation pathway was proposed based on the products identification and theoretical calculations. In general, HFPO-TA would be transformed into shorter-chain PFASs, including hexafluoropropylene oxide dimer acid (HFPO-DA), perfluoropropionic acid (PFA) and trifluoroacetate (TFA). This research provides basic information for HFPO-TA photodegradation process and is essential to develop novel remediation techniques for HFPO-TA and other alternatives with similar structures.     

保定市大气污染特征和潜在输送源分析

保定市是京津冀地区重要城市之一.为了解保定市大气污染物质量浓度特征和潜在输送源,对保定市国控点2017年1月1日-12月31日PM₁₀、PM_2.5、SO₂、NO₂、O₃、CO等常规大气污染物数据进行分析,并利用TrajStat后向轨迹模型进行区域传输研究.结果表明:①ρ（PM₁₀）、ρ（PM_2.5）、ρ（SO₂）、ρ（NO₂）分别为（138±96）（84±66）（29±23）和（50±24）μg/m3,与2016年相比分别下降5.9%、9.1%、25.5%和13.1%;ρ（CO）较2016年下降了14.0%;ρ（O₃）较2016年增长了25.2%.ρ（PM₁₀）、ρ（PM_2.5）、ρ（NO₂）和ρ（O₃）分别超过GB 3095-2012《环境空气质量标准》二级标准限值的0.97、1.40、0.25和0.34倍,ρ（SO₂）和ρ（CO）未超标.②除ρ（O₃）外,其他污染物质量浓度均呈冬季最高、夏季最低的季节性特征,其中,冬季PM_2.5污染最为严重,春季PM_2.5~10（粗颗粒物）污染严重.③空气质量模型源解析结果显示,保定市ρ（PM_2.5）约60.0%~70.0%来自本地污染源排放.后向轨迹结果表明,在外来区域传输影响中,保定市主要受到西北方向气团（占比为21.7%~60.0%）远距离传输和正南方向气团（占比为34.8%~50.5%）近距离传输的影响.④PSCF（潜在源贡献因子分析法）和CWT（浓度权重轨迹分析法）分析表明,除保定市及周边区县本地污染贡献外,位于太行山东麓沿线西南传输通道的邯郸市、邢台市、石家庄市是影响保定市PM_2.5的主要潜在源区.研究显示,PM_2.5为保定市大气中的主要污染物,并呈冬季高、夏季低的变化特征,其主要来自西北远距离输送和南部近距离传输.      

闽江河口养虾塘养殖期和非养殖期CO2通量变化特征

为揭示河口区陆基养虾塘从养殖期到非养殖期一年间的CO₂通量变化,以福建省闽江河口鳝鱼滩陆基养虾塘为研究对象,于2016年5月-2017年3月采用悬浮箱/静态箱-气相色谱法对养虾塘养殖期水-大气界面和非养殖期沉积物-大气界面白天CO₂垂直通量进行原位观测.结果表明:①养虾塘在整个研究期间CO₂通量变化范围为-62.87~162.81 mg/（m2·h）,平均值为（42.66±18.12）mg/（m2·h）,总体上表现为大气CO₂的释放源,且呈非养殖期CO₂通量平均值[（78.51±16.61）mg/（m2·h）]显著高于养殖期[（17.98±18.26）mg/（m2·h）]的特征.②养殖期间,养虾塘CO₂通量呈"排放-吸收"交替变化的特征,而非养殖期养虾塘一直是大气CO₂的净排放源.③养虾塘养殖期CO₂通量时间变化特征主要受到ρ（DOC）（DOC为总溶解有机碳）、ρ（SO₄2-）、ρ（Cl-）、盐度、pH、ρ（Chla）（Chla为叶绿素a）的影响,其中,pH和ρ（SO₄2-）是其主要影响因子,而ρ（TDN）（TDN为总溶解氮）、ρ（TDP）（TDP为总溶解磷）、ρ（SO₄2-）对非养殖期CO₂通量时间变化影响较大.研究显示,滨海陆基养殖塘是大气CO₂的重要来源,其排放通量多低于河流、水库等水生生态系统,但高于湖泊生态系统;养殖塘CO₂通量受人为影响明显,其较高的变异性与养殖生物、饲料投放以及浮游藻类有关.      

应用改良型水质综合指数法评价饮用水水质

应用1套改良型水质综合指数法对3种不同类型的饮用水水质进行评价。将选取的26项检测指标按照卫生学意义分为5大类,并对各分类指标赋权。选用内梅罗法和最差因子判别法与五色等级分级法结合对2017年4—8月的3种类型饮用水进行水质评价。除7月和8月的管网水水质为2级（水质综合指数>0.5,蓝色）以外,其余月份的出水水质均达到1级（绿色）评价标准。不同类型饮用水中对水质综合指数影响最大的水质分类指标均是有机污染指标。2种不同类型的净水机出水水质均优于管网末梢水,但需注意个别指标的污染。     

博斯腾小湖最低生态水位与水量盈缺分析

近年来,博斯腾湖小湖水位大幅波动引发了湖区生态环境问题,基于最低生态水位的湖泊水量盈缺分析对小湖水量调度和生态保护有积极意义。基于1991—2019年达吾提闸实测小湖水位数据,结合湖盆DEM数据和遥感NDVI数据,分别采用年保证率设定法、湖泊地形分析法和曲线相关法计算小湖区最低生态水位;并利用其他水文、气象和农业活动和湖区水量调控数据,使用主成分分析法解析小湖缺水的主要驱动因子。结果表明:博斯腾湖小湖最低生态水位为1047.18 m,多年平均满足率为31.03%。1991—1998年、2005—2015年和2017年间博斯腾小湖区发生了生态缺水,平均缺水量为0.69×108 m3。上游来水量是小湖生态需水保证情势的主要驱动因素,农业活动和宝浪苏木水量调节活动次之,气候变化影响相对较小。2000年之前,生态缺水主要由湖区水位调控产生;2000年之后,灌区农业取水成为生态缺水主要诱因。该研究结果可以为博斯腾湖小湖水量调控和湿地生态系统恢复保护提供科学依据。     

电化学微传感器检测水中痕量铜离子

为改善微电极在阳极溶出伏安法检测重金属离子过程中低电流响应和低电催化能力的缺点,提出了一种在碳纤维微电极表面合成还原氧化石墨烯/纳米金材料制得还原氧化石墨烯纳米金修饰碳纤维微电极（rGO/AuNPs CFMEs）的方法.通过SEM表征,所制备的rGO/AuNPs CFMEs具有比表面积高、吸附能力强和催化活性好的特点,因此改性微电极适合作为方波阳极溶出伏安法（SWASV）测定水中铜离子（Cu²⁺）的工作电极.在构建微传感器测试水中痕量铜离子系统后,对pH值、电导率、富集时间和富集电位等检测条件进行了优化.在pH值为4,电导率为36.1S/m,富集时间为360s,富集电位为-1.2V的最佳条件下,铜的线性范围和检出限分别0~1.0μmol/L和2.4nmol/L.此外,微传感器的可重复性、长期稳定性以及选择性也得到了验证.